Tratamiento y acabado de componentes para automoción
Precision, cleanliness, and surface quality for automotive components.
At Edeltec, we develop cleaning, degreasing, and finishing solutions tailored to each component, material, and production requirement.
Requirements of the automotive sector
Automotive components require cleaning, deburring, and surface finishing processes adapted to the geometry of each part, the material, and the demands of the subsequent process. Surface preparation can be crucial for achieving uniform and repeatable results.
Components and finishing processes
Space reserved for Before / After image
(Automotive component)Each component may have different cleaning, burr removal, surface preparation, or finishing needs. The appropriate technology depends on the geometry, material, hard-to-reach areas, and process requirements.
- ✓ Surface finishing of automotive components
- ✓ Finishing of machined parts
- ✓ Finishing processes for automotive
- ✓ Cleaning of machined parts
Each part requires a specific process.
At Edeltec, we analyze the component, the level of contamination, the required finish, and the production needs to define the most suitable technological solution considering deburring, polishing, and surface treatment.
Finishing processes for automotive components
Gears, camshafts, valves, injectors, and brake components may require different cleaning, deburring, polishing, or surface preparation processes. The solution should be analyzed according to the specific characteristics of each component and the result that needs to be achieved.
Gear
BEFORE
AFTER
Cleaning, deburring, and surface preparation according to the geometry and requirements of the component.
Camshaft
BEFORE
AFTER
Cleaning and finishing processes adapted to machined surfaces and hard-to-reach areas.
Valve
BEFORE
AFTER
Preparation and finishing of machined components according to the characteristics of the part and the subsequent process.
Injector
BEFORE
AFTER
Cleaning and treatment of precision components taking into account their geometry and process requirements.
Brake component
BEFORE
AFTER
Cleaning, deburring, and finishing processes for automotive machined components.
Machined plate
BEFORE
AFTER
Surface preparation and finishing of machined components according to the geometry and needs of the process.
Maximum precision and repeatability
Consistent results piece after piece.
Clean and defect-free surfaces
Controlled removal of burrs, residues, and imperfections.
High performance in production
Processes prepared for small, medium, or large series.
Ready for automation
Solutions that can be integrated into automated industrial processes.
What process does your automotive component need?
The choice of process depends on what needs to be achieved with the part: removing oil and residues, removing burrs, improving the surface finish, treating hard-to-reach areas, or preparing the component for a subsequent operation.
Technical cleaning
Remove oils, particles, and residues from the manufacturing process.
Deburring
Remove burrs and improve certain areas of the part according to the characteristics of the component.
Polishing and surface finishing
Improve the surface condition of the part according to the requirements of the component.
Preparación para procesos posteriores
Prepare the part for a subsequent operation when the characteristics of the process require it.
Technologies for treating automotive components
The technology is selected based on the geometry of the part, the material, the required level of finish, and the characteristics of the process. Different technologies may be suitable depending on the specific application.
We integrate finishing processes for machined parts and treatment of automotive machined parts to ensure the best results in polishing automotive parts and deburring automotive components.
1. Component
Type of part, geometry, material, and dimensions.
2. Contamination
Type and level of oils, greases, residues, or particles.
3. Required finish
Level of cleanliness, surface preparation, and technical requirements.
4. Production
Volume of parts, cycle times, and automation needs.
5. Technological solution
Selection of the most suitable process, technology, and configuration.
The right technology starts with understanding the application.
At Edeltec, we combine technical expertise, process knowledge, and technology from specialized manufacturers to develop solutions tailored to each industrial need.
Results that can be measured
The finish is not only visible: it can also be measured and validated
Each process must meet defined technical requirements. At Edeltec, we evaluate the result on the actual part to verify the quality of the finish, cleanliness, roughness, cycle time, and process repeatability.
Surface roughness
Ra · Rz · Rpk · Rk
Cleaning quality
Particles · residues · oils
Cycle time
Process time · productivity
Repeatability
Consistent quality · process stability
Example of result
BEFORE
Ra 1.23 µm
AFTER
Ra 0.02 µm
* Graphical representation of the improvement in surface roughness (illustrative example).